PCB design, schematic, cases and software made by GRA & AFCH. Nixie Clock Shield NCS318 designed for Arduino Uno or Mega, so it allows you to write your own unique programs on the Arduino platform.
The latest sources files are always available onour github channel. USB Drivers for PC: gra-afch/category/downloads/drivers/. Schematics for Shield board NCS318: gra-afch/category/downloads/schemes/shields/. Nixie Tubes Shield NCS318 v 1.1 1 pc.Set of electronic parts and components 1 pc. Set of Hex pillars 1 pc.
Printed electronic sheme for Shield board 1 pc. Printed User manual on vintage-style paper 1 pc. This listing does NOT contain the TUBES, Arduino board, GPS, Remote and Power Supply. All Accessories are available below. And upload software into your arduino.
Easy to build beautiful clock we also offer Clock case in two versions: economic Acrylic case and outstanding Wooden case. Easy to customize firmware under Your own needs, thanks to an open platform Arduino. The latest version of the firmware is always available on GitHub.No need for additional drivers we are use only Genuine USB to serial converters. Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux. Very high qualty of PCB. If you have ANY questions. 6 digits IN-18 Nixie Tubes [hh:mm:ss]. Date format: DD:MM:YY. The maximum possible brightness of the tubes.
Slot Machine Anti poisoning tubes saving function. Temperature display [Celsius or Fahrenheit] (optional, choose in selector).
GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 V power supply, optional, choose in selector). IR remote controls (Remote control model Sony RM-X151/RM-X153, optional, choose in selector). IR protocol SIRC or any protocol if you able to implement it.
Automatic update information on the tubes. Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change! Switching on/off LED backlight in the matter of seconds.
As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: Mission Impossible, We Wish You).Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end.
Unique detailed tube test our soft check each segment on every lamp. Distinguishable to see segement failure. Integrated adjustable High Voltage Power supply: 150 220 V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. Test points for testing, adjusting and controlling low and high voltage circuits.
Highly Accurate RTC (Real Time Clock) DS3231SN with Backup battery. 3 buttons on board to control. IR Reciver TSOP4836 for IR remote controllers (In case of using Arduino UNO, they may conflict with Tone library). If you plan to use remote controll, we strongly recommend the using of Arduino MEGA works fluently. Temperature sensor connector (DS18B20; 1-Wire protocol).8 pcs of RGB SMD LEDs. Places for 2 column with 2 neon dots inside. Separate controls upper and lower dots.
Power consumption: 11-14 VDC, 750 mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions 5.5 x 2.1mm (center pin positive +). Nixie Tubes Clock Shield NCS318 size: 264(L) x 90(H) x 53(W) mm. Assembled Arduino Nixie Tubes Clock on Shield NCS318.After payments received and verified. The item "DIY KIT IN-18 Arduino Shield NCS318 Nixie Tubes Clock 12/24H WITHOUT TUBES" is in sale since Friday, June 21, 2019. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios".
The seller is "gra_and_afch" and is located in Dnipro. This item can be shipped worldwide.