DIY KIT for IN-18 Arduino Shield NCS318-4. Nixie Tubes Clock with Columns and Sockets. DIY KIT for IN-18 Shield Nixie Clock with Column. Developed for 4 IN-18 xUSSR Nixie Tubes with Sockets. IN-18 Tubes are one of the biggest mass-produced Nixie Tubes.Nixie Clocks are one of the most beautiful and popular Vintage Clocks. Clock features Startup Tune, RGB backlight, USB port for updates.
DIY KIT developed for Tubes Shield Board and Control Arduino Board. Options include Tubes, Column, Arduino, Power Supply. Accessories include GPS Receiver and Remote. DIY KIT is made for Arduino UNO and MEGA 2560 Control Boards. It allows you to write your own uniqe programs for the Arduino platform.
All the latest Source codes are always available on our GitHub channel. PCB, Design, Schematics, Case and Software made by GRA & AFCH. Tubes Shield (NCS318-4) Bare PCB.Control Arduino Board (UNO or MEGA 2560) (optional , choose in selector). IN-18 Nixie Tubes 4 pcs (optional , choose in selector). Set of Electronic Parts and Components for Shield (NCS318-4) Board.
Set of Screws and Spacers for Shield and Arduino Boards. Glass Column (for two Dots) (optional , choose in selector). GPS Receiver (GA-6) (optional , choose in selector). Remote (optional , choose in selector).
Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector). Principal Electrical Scheme on paper. BOM List for Shield (NCS318-4) Board. User Manual on a Vintage style paper. Power Supply is optional for the KIT.
We offer optional accessories for Arduino Nixie Clocks. If you have ANY questions. Shiled support 4 IN-18 Nixie Tubes [hh:mm:ss]. Temperature display (DS18B20) [Celsius or Fahrenheit]. GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, included optionaly).
Operation via IR remote control (Remote control Sony RM-X151, included optionaly). No need refresh or update information on the tubes. The maximum possible brightness of the tubes. Date format: DD:MM:YY.Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE.
Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test. Integrated High Voltage Power supply: 150 220V.3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. RTC (Real Time Clock) with Backup battery. 3 buttons on board to control. Potenciometer to adjust High Voltage. IR reciver TSOP4836 for IR remote controllers (may conflict with Tone library). 8 pcs of RGB SMD LEDs. Places for 2 column with 2 neon dots inside. Separate controls upper and lower dots.
Recommended: 12V, 1-2A (center pin positive +). Nixie Tubes Shiled NCS318-4 PCB size: 170 mm x 53 mm x 20 mm. Easy to build beautiful clock we offer housing. A special socket for each pin IN-18 - Easy to change tubes. Easy to customize firmware under Your own needs, thanks to an open platform Arduino.The latest version of the firmware always available on GitHub. No need to download drivers we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux. Very high qualty of Printed Circuit Boards. IN-14 Arduino Shield NCS314-4 Electrical Scheme.
IN-18 Arduino Shield NCS318-4 Nixie Tubes Clock by GRA & AFCH. If you have ANY questions, PLEASE ASK us. The item "DIY KIT for IN-18 Arduino Shield NCS318-4 Tubes, Column, Arduino, Accessories" is in sale since Friday, July 17, 2020. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch_2" and is located in Dnipropetrovsk.
This item can be shipped worldwide.