Arduino Pressure Logger Shield

Arduino Pressure Logger Shield
Arduino Pressure Logger Shield
Arduino Pressure Logger Shield
Arduino Pressure Logger Shield
Arduino Pressure Logger Shield

Arduino Pressure Logger Shield

Input Pressure Range: 0 - 100kPa (Gauge). Output Voltage Range: 0.1 - 4.9V.

A1: Record Button (Active Low). D7: Log Mark Switch (Active Low). D2, D3, D5, D6: LED Matrix IO. Maus-Tec DIY kits and tinker modules are the perfect start to a new project, or addition to a current project. Each module is available as a parts kit or fully assembled and ready to go. The Pressure Logger Shield uses the versatile MPXV5100 pressure sensor module to interface with your Arduino Uno compatible development board. The pressure sensor is attached to a variable gain amplifier, allowing for finer tuned readings in the lower pressure ranges. For convenience, this shield has a Record button and indicator, which can be used to start and stop recording if you have an SD card shield. There is also a connection for a Mark switch, which can be used to quickly and easily mark your logs for event tracing. This shield also features a charlieplexed bar graph display for visualizing the current pressure reading, eliminating guesswork and the need for an external monitor or PC.

This pressure shield is available as a kit. You will need an Arduino Uno compatible development platform, as well as an SD shield of you plan to store the data. You can also stream the data over USB to store on your PC. Arduino Sketch & Documentation: arduino-pressure-shield/blob/main/.

The item "Arduino Pressure Logger Shield" is in sale since Wednesday, August 18, 2021. This item is in the category "Business & Industrial\Electrical Equipment & Supplies\Electrical Boxes, Panels & Boards\Electrical Panel & Board Accessories". The seller is "ewisert" and is located in Plainfield, Illinois. This item can be shipped worldwide.
Arduino Pressure Logger Shield


Homepage  Links  Contact Us  Privacy Policy  Terms of service